Rear Soft Window For CF MOTO Z Force 500 / Z Force 800 / Z Force 1000


SKU: B0110-08201BK

< Click the picture to get code↓

DUST PROOF: Z FORCE 800 windshield helps keep the dust out when riding on a trail. Without a dust barrier, the dust and cold air can blow into the cab and make you feel terrible. Moreover the soft windshield will be much cooler than solid windshield.
TRANSPARENT PVC WINDOW:  The wind proof featured with waterproof transparent PVC, you can roll up the PVC window film separately with straps, not the whole from the bottom. Which is both convenient for ventilation and prevent part of dust.
REFLECTIVE STRIP: UTV soft rear windshield is made of high-quality 900D fabric and pu coating, which is water/uv resistant, scratch and tear resistant, durable. With 4 reflective strip design, it can increase visibility at night when illuminated by light source.
DOUBLE ZIPPER DESIGN: This Z FORCE rear window is designed with double zipper, inside and outside the window. Which can easily open and close the zipper from the cab or outside the utv without the need for assistance. And PVC coating on the outside of the zipper so you don't have to worry about the zipper getting dirty and wet.
Package Included: 1* Rear Soft Windshield; 5* Plastic Push Pin ; 1* Instruction

Adjustable Buckle

Designed With adjustable strap clips, you can adjust it at will to make the soft rear windshield better fit your UTV.

Hook and Loop Fasteners

Hook and Loop Fasteners can be well attached to the pole, but also can be tied to the roll-up transparent PVC window, to maintain air circulation.

Transparent PVC

Put down the transparent window, you can see the situation behind the UTV; Roll up the transparent window, you can let the wind bring you infinite cooling.


Remove original factory roof by loosening six screws that secure the roof. Retain the removed roof and hardware.


Place the soft windshield to the vehicle. Loosely wrap seven Velcro straps [A] to roll bar. Attach six buckle straps [C] to vehicle frame.


Use the metal ring [D] as a template, mark and drill fifive 8 mm holes on cargo bed wall. Then secure the bottom of the windshield with five supplied push pins.