Carrito de compra
Su carrito actualmente está vacío.
Kemimoto Mirror Installation Guide

Kemimoto Mirror Installation Guide

After buying your UTV mirrors, you definitely can‘t wait to get them to play their part. No considering the types of machines, most of the mirrors can stay where they should be within 2-3 minutes. You've come to the right place if you just got a mirror and are confused about installing it.

Installation Guide of Different Types of mirrors

According to the installation position of the mirror, it can be divided into the rearview mirror and the side mirror. The rearview mirror can make it easy for you to get the blind spot of rear vision when driving, such as the situation behind your ride or behind you. The side mirror is used for the car to observe the rear road conditions during the reversing and the driver to observe the surrounding conditions of the vehicle during the driving. Both the rearview mirror and the side mirror have curved surfaces and flat surfaces. The curved surface is for a wider field of vision, and the flat surface is for a more realistic field of vision.

We have divided the different types of clamps for the mirrors and side borders. There are two and three different mirror types for the rearview mirror and side mirror, respectively. To know how to install UTV mirrors, you must first identify the cage of your UTV models and the tube clamp structure corresponding to the mirror. That's what we will take you to understand in the following text.

Rear View Mirror Installation Guide

1. Round Clamp

Most mirrors are round clamps, ranging from 1.65" - 2.00."
Installation steps:

  • Put the pinch opening in the corresponding position
  • Pair the mirror section with the pinch tube
  • Add screws to two interfaces and fasten screw caps 

2. Special fittings for some vehicles

Some specific vehicles have corresponding mirrors, such as RZR, Ranger lineup, etc. Installation steps:

  • Place the interface on the roll cage
  • Install the screw fittings on the mirror
  • Tighten the screw with a hexagon wrench

2. Special fittings for some vehicles

Some specific vehicles have corresponding mirrors, such as RZR, Ranger lineup, etc. Installation steps:

  • Place the interface on the roll cage
  • Install the screw fittings on the mirror
  • Tighten the screw with a hexagon wrench

Side Mirror Installation Guide

1.Round Clamp

Like rearview mirrors, most of the mirrors are mainly round clamps, and the diameter of the clamps ranges from 1.5-2", of which the diameter is 1.65". Installation steps:

  • Loosen the screw
  • Rotate and adjust the angle of the mirror
  • Adjust the mirror to the ideal angle and lock it with the slot
  • Put the anti-skid pad on the corresponding position of the roll cage
  • Fix the mirror on the roll cage

2. Pro-fit Clamp

They were mainly used for utility SxS, like Polaris Ranger, Can-am defender series, etc. Installation steps:

  •  Put the washer into the nut
  • Build the components in order
  • Put the screw into the asse5mbly
  • Attach the semi-assembled kit to the profit cage with a clamp tube
  • Tighten the screw with the hexagon nut

2. Pro-fit Clamp

They were mainly used for utility SxS, like Polaris Ranger, Can-am defender series, etc. Installation steps:

  •  Put the washer into the nut
  • Build the components in order
  • Put the screw into the assembly
  • Attach the semi-assembled kit to the profit cage with a clamp tube
  • Tighten the screw with the hexagon nut

3. Special fittings for some vehicles

We have some special mirrors customized for special models; these mirrors can fit the special mounting holes on the car, such as the Maverick X3:
We prepare the corresponding mirrors for the X3 lineup, for X3 has a special hole on the roll cage. Installation steps:

  • Place the interface on the roll cage
  • Place and install the clamp in the corresponding position of the roll cage
  • Install the corresponding screws

Final Thoughts

The above is the installation method of most of Kemimoto's mirrors on sale, and the installation of all products is not very complicated. In addition, we generally have installation instruction videos of the related products on YouTube and product detail pages, so you don't need to worry about everything after purchasing. If you are still worried about problems that may exist, you can contact us by phone or email. Kemimoto provides only the most professional gear support for UTV enthusiasts.